DPI Imprint Alginate Powder – Impression Material

A satin textured, micro cellular Alginate powder.
Lead free
Excellent dimensional stability, fine reproduction.
Pleasant and acceptable flavour
Ample working time and controlled flow.
Made from the best quality/grade of raw material.

Dpi Imprint Alginate Powder is a high precision alginate impression material
used to make precision dental impressions. Dpi Imprint Alginate Powder is a
dust free alginate, with normal setting time. It exhibits fast absorption of water
and enhances the ease of mix. The final mix of the impression material is a
homogenous mass with smooth and compact surfaces. The impression can be
stored for a long time before pouring the cast.

Ratio – 15 gm powder : 48 ml water, as per scoops provided
Working time at 27° C – approximately 2 minutes from the start of mix.
Setting time at 27° C – approximately 2.1/4 minutes.

1 x 450 gms Aluminium foil pouch

Open the bag and pour the alginate into a hermetically sealed container. It is best to keep the product batch number and expiration date, cutting them from the bag
Shake 2 or 3 times to disperse the powder evenly
Powder dosing: with the help of a dosing measuring spoon, scoop out the alginate without compressing the powder. Level and remove excess alginate, passing the flat part of the spatula on the spoon and then pour into a rubber mixing bowl.
Water dosing : for each level scoop of powder, 1/3 of a measuring cup of water is necessary. An ideal reading level of the water can be performed by positioning the measuring cup at eye level. When the lower part of the drop (meniscus) is tangent to the notch on the measuring cup, the dose is correct
Pour the water* in the powder
Start mixing by pressing the material against the sides of the mixing bowl with a hard spatula
This procedure must be performed during the mixing time indicated by the manufacturer. Once an even consistency has been obtained, mixing is complete.