D-Tech Restore Glass – Restorative GIC

Humid-Stable glass ionomer restorative cement
Aesthetic looks
Fluoride release

A fluoride-releasing glass ionomer restorative cement (A2 Shade).

POWDER:
Silica – 41.9%
Alumina – 28.6 %
Almunium Flouride – 1.6%
Calcium fluoride – 15.7%
Sodium fluoride – 9.3%
Almunium Phosphate – 3.8 %
LIQUID:
Polyacrylic acid – 35%
Tartaric Acid – 5-15 %
Water
TECHNICAL SPECIFICATION:
Mixing Time  23°C – 30 second
Working time B 23°C – 2 min
Setting time B 23°C –  4 min

1 x 15gm Powder
1 x 13gm Liquid

2.8/1.0 g.1 level scoop of powder to 2 drops of liquid.
Must be mixed within 45 sec.
Use a polymer paper mixing pad for mixing the powder and liquid.
Mix over a large area with a plastic spatula.
Isolate the cavity.
Apply calcium hydroxide liner.
Condition the cavity wall properly.
For accurate dispensing of powder, lightly tap the bottle against the hand. Do not shake or invert.
Hold the liquid bottle vertically and squeeze gently.
Bulk insertion of GIC.
Complete it by doing Finishing and Polishing.
Close bottle immediately after use.