Dental Cordless Endo Motor i-Smart with LED 16:1 Standard

1. Ergonomic design easy to carry
2. With LED lamp and high brightness, it can help doctors get a better look at the root canal environment.
3. Built-in high-capacity lithium battery, so it can reduce battery change times and reduce costs for machine.
4. Dental contra-angle Handpiece and lamp holder can withstand 135°C high temperature and high pressure sterilization.
5. 9 types preset programs
6. 16:1 standard configuration contra angle
7. Soft start and soft stop can be achieved and the operation is more comfortable. Simultaneously, it will not break the needle when root canal files encounter instantaneous shock.

Endo Motor i-Smart LED Cordless Endo motor is designed for optimum freedom making conventional endodontics better & efficient. Endo Motor i-Smart amazes as a cordless endo motor with brilliant & smart optimization for Advanced Endodontics. Optimum head size enables a better view for the endodontists thus, enhancing their efficiency.
Third Generation Endo Motor With 16:1 Gear Ratio
WORKING MODES :-
AUTOMATIC STOP:
When the resistance is higher than the torque, there is no automatic reverse, and the equipment will stop working.
FORWARD & REVERSE RECIPROCATING MOTION:
It will keep forward and reverse circularly, the time would be forward 1/2 seconds, reverse 1/4 seconds
AUTOMATIC REVERSE & STOP:
When the resistance is higher than the torque, the equipment will auto-reverse, and then stop after the resistance disappears.
AUTO-CONTINUOUS:
When the resistance is higher than the torque, the equipment will auto-reverse and will be forward again after the resistance disappears.

Technical Specifications:
Main engine Voltage: 3.7Vdc
Battery capacity: 950mAh
Charger input voltage: AC110-220V, 50-60Hz
Charger output voltage: 5Vdc
input voltage: 1A

1 x i-Smart Endomotor Unit
1 x Charging Unit
1 x Contra Angle
1 x Power Adapter
2 x LED light attachments
1 x User Manual

Installation of the contra-angle head – Push the contra angle head securely into the corresponding location spot of the EndoPro endo motor. For removing the contra-angle handpiece, pull it out directly in a straight direction.
Changing the root canal files – Insert the file into the shaft hole of the contra angle handpiece until a click is heard. Do not press the push button of the contra angle handpiece while inserting, then try to take out the file without pressing the button of the contra angle handpiece. If the file does not come out, it means that the file is installed well. For removing files, please press the push button on the head of the contra angle handpiece and take off the file.
Press the power key for 2 seconds, the screen will display and the endo motor will be ready to operate. Then press the program key “P” to choose the procedure, and press the “+/-” key to choose speed.
Press the “P” button for 2 seconds, when the screen displays 16:1, then press the “P” button again, you can switch the torque with the “+/-” button. By pressing the “P” button again, you can choose modes: automatic stop, forward and reverse reciprocating motion, automatic reverse and stop, auto continuous mode.
When you are working and you need to change the speed, press the “+/-” button directly. Press the “exit” button to quit the current working situation. Long-time pressing of this key will cause files to rotate in reverse.