Dental Push Button Airotor Handpiece

2 x Holes in Air-Rotor Head: 2 holes in the air-rotor head have been equipped to increase the cooling effect for the tooth.
High-speed handpiece.
Removes tooth structure faster with less pressure, vibration, and heat generation.
Cost-Effective
Uniquely designed & Durable
Corrosion Resistant.
Easy to operate.
Superior functionality.
Small in size and lightweight makes it universal in application.

Dental Push Button Airotor Handpiece Airotor is a high-speed dental drill developed on the principle of delivering precision to the dentist.
The air rotor handpiece is designed to rest comfortably in any human hand to allow the minute and precision hand movements that are required to carry out delicate dental treatment.
With the innovative technique, those hard to reach and hard to see places are more easily accessible, thus streamlining and shortening procedures, making it possible to achieve results with greater accuracy and precision.
INDICATION :
Used in cavity preparation.
Access opening during root canal treatment.
Altering prosthesis.
Used for polishing enamel or restorative materials.

Head Size: Ø11mm x H14 mm
Total Length: 12.5cm
COMPOSITION :
Material Made up of Stainless steel.
Normal working air pressure should be around: 0.25Mpa – 0.30Mpa. please kindly use the bur of ISO-standard, 1.59-1.60mm, any other bent, damaged, non-concentric burs will damage the service life of the cartridge seriously.

1 x High-speed Dental Push Button Air rotor

Preparation:
Ensure that the handpiece is clean and sterilized before use. Autoclave it at 135 degrees Celsius for proper disinfection.
Check that the bur (drill) you plan to use is compatible with the handpiece and meets the specified size standards (1.590-1.600 mm ISO).
Connection:
Connect the handpiece to the dental unit using the two-hole Borden Chair connection.
Air and Water Supply:
Connect the air and water supply to the handpiece. Ensure that the air pressure is within the recommended range (0.18-0.25Mpa).
Verify that the water spray is functioning properly (single water spray).
Loading the Bur:
Use the push-button mechanism to load the bur into the chuck of the handpiece securely. Ensure that it is properly seated.
Positioning and Operation:
Position the handpiece appropriately for the dental procedure you are performing.
Start the dental unit and activate the handpiece. The rotation speed is 350,000rpm for Super Torque Head & 280,000rpm for Straight Head, providing high-speed and efficient cutting.
Cooling:
During operation, the single water spray helps in optimum cooling of the treatment site, preventing overheating.
Handling and Grip:
Take advantage of the sleek body design and ergonomic features for a better grip and control during procedures.
Completion:
Once the dental procedure is completed, turn off the