Prevest Fusion Flo – Flowable Composite A2

Optimal flowability
Higher filler loading of 70% w/w
Excellent physical properties
Lower polymerization shrinkage
Very good abrasion resistance

Fusion Flo is a flowable composite that provides strength & high wear resistance and also characterized by optimum surface affinity.
it can penetrate into most difficult areas.

Composition :
Bisphenol A Glycidyl Methacrylate,
Ethoxlated Bisphenol A Dimethacrylate,
Urethane Dimethacrylate,
Triethylene Glycol Dimethacrylate,
Silanated Barium Glass Powder,
Amorphous Fumed Silica,
Total inorganic filler 70%.
Technical Data :
Curing Time : 40 Sec.
Depth of Cure : 1.0 (Opaque Shade), 1.5 (Other Shade)
Compressive Strength : 150 – 200 MPa
Flexural Strength : 100 – 120 MPa
Precautions : Eugenol containing materials should not be used with this product because they may effect polymerization and interfere with the  hardening process. Being sensitive to heat and light, the syringes should be kept away from direct sun light.
Storage Conditions : Store at temperature between 10°C to 24°C. Close the cap carefully after use.
Keep away from moisture. Shelf life not affected after opening if stored in a cool dry place.
Shelf Life : 3 years from the date of manufacturing.

Prevest Denpro Fusion Flo A2 Intro Kit
2 x 2g Syringes (A2)
10 x Applicator Tips

Apply the material with applicator tip directly in the cavity and pre contour with a suitable instrument.
The layer should not be thicker than 2mm.
Light cure for 40 sec using standard curing light.