Galaxy Light Cure Unit Cordless Light Cure Unit

Wireless: The battery can be replaced.
Three working modes: Full, Ramping, Pulse.
Time setting: 5s 10s 15s 20s 25s 30s 35s 40s.
Automatic memory: A full charge can be used for over 200 times (10 s/time).
Constant light intensity, the solidification effect is stable even the battery power decrease.
With wire or wireless. Even the battery runs out, it can work by connecting power supply with wire.

Light Curing Unit is used for polymerization of light cure resin-based composites.

Power input AC:- 100V-240V 50/60 Hz.
Net weight:- 143g.
Light output:- 650-850mW/cm2.
32*37*264mm
Light intensity:- 1500 m W/cm2.

1 x Light Cure Unit
1 x Light Guide Stick
1 x Power Adaptor
1 x Light Sheilding Sheet
1 User Manual

Charge the Device:
Ensure the unit is adequately charged before use.
Plug the device into a power source using the provided charger.
Power On/Off:
Power on the unit using the designated button.
Select the desired working mode (Strong, Gradually Strong, Flashing) based on the procedure requirements.
Position the Light Guide:
Attach the light guide stick to the device, ensuring proper connection.
Patient and Material Preparation:
Position the patient comfortably.
Apply the light-curable dental material as per the specific procedure.
Activate the Light:
Direct the light guide tip to the area requiring polymerization.
Press the light activation button to initiate the curing process.
Adjust Duration:
Set the curing time based on the recommended guidelines for the chosen working mode.
Monitor Curing Process:
Keep the light guide near the material during the designated curing time.
Power Off:
Power off the unit after completing the curing process.
Clean and Store:
Wipe the light guide tip with a clean, alcohol-dampened cloth.
Store the unit in a designated space, ensuring proper care and maintenance.